buying LP-HEER parts

Post Reply
Blade
User
Posts: 27
Joined: Tue 18 Dec 2018, 20:08
Contact:

buying LP-HEER parts

Post by Blade » Mon 06 May 2019, 19:08

hello collectors, i am looking for a lp34/heer aluminium barrel for my lp-heer flare gun, because someone put a steel lp-28 barrel on it. it has to come with an extractor and without dents. scratches and finish wear is okay because the gun is also quite used.
send offers on PM or on this e.mail:
Tito.tomos.69@gmail.com
best regards!

billybibbet
User
Posts: 168
Joined: Fri 01 Nov 2013, 20:52
Contact:

Re: buying LP-HEER parts

Post by billybibbet » Fri 10 May 2019, 01:59

I would not be in a rush to change that. Sometimes such things were done either in production or as "field expedient" repair. I would leave it for now.

As an example, I have a steel framed LP34 with an aluminum barrel and wood grips with horizontal cuts. I learned this is a somewhat rare variant produced late war, from leftover parts. There are other similar examples in existence.

User avatar
signalman
User
Posts: 1106
Joined: Tue 27 Sep 2011, 14:51
Location: Sunny Florida
Contact:

Re: buying LP-HEER parts

Post by signalman » Fri 10 May 2019, 02:45

Hello Blade,

You do not mention if the Steel barrel is serial numbered to the gun, mismatched, or has no serial number. I have an aluminum barrel with extractor that I would trade for a steel barrel with extractor, but you should only do it if the barrel you have is mismatched.

Good Collecting, Howard
Guns have only two enemies, rust and politicians.


I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !

Blade
User
Posts: 27
Joined: Tue 18 Dec 2018, 20:08
Contact:

Re: buying LP-HEER parts

Post by Blade » Fri 10 May 2019, 16:34

this wasnt surplused by anyone, when the war was over this was droped and the germans and collaborators flead west, this one was found in a attic and it was rusted shut, i cleaned it up, its a walther made in 1942 (ac42) the number on the frame is "335b" and the number on the barrel is "24699" the marking on the barrel dont have any eagles just some normal proffs and a star infront that i assume is from a hardness test, its completly late-war it has all the stamped parts and a thin dark-brown grip
59896627_1205519282950117_6554588631678320640_n.jpg
60343092_890762141274882_3980242632398864384_n.jpg
59839657_324650584891095_8362781502655692800_n.jpg
You do not have the required permissions to view the files attached to this post.

Blade
User
Posts: 27
Joined: Tue 18 Dec 2018, 20:08
Contact:

Re: buying LP-HEER parts

Post by Blade » Fri 10 May 2019, 16:34

59762111_361260911400070_1153365363707084800_n.jpg
You do not have the required permissions to view the files attached to this post.

Blade
User
Posts: 27
Joined: Tue 18 Dec 2018, 20:08
Contact:

Re: buying LP-HEER parts

Post by Blade » Fri 07 Jun 2019, 14:33

in addition to the aluminium barrel i am also looking for a early barrel spring set,early bakelite grips with screw, a trigger and a trigger pin
its okay if they have patina or alittle rust solong as they are functional
if you have just one of these im also intrested.

User avatar
signalman
User
Posts: 1106
Joined: Tue 27 Sep 2011, 14:51
Location: Sunny Florida
Contact:

Re: buying LP-HEER parts

Post by signalman » Sat 08 Jun 2019, 02:27

I do have the Barrel with extractor $ 50

Trigger and trigger pin, $ 35

Grips and gripscrew, $ 50

Shipping in USA $ 8.00 ; Total $143

I do not have the barrel spring set at this time.

email me to confirm purchase and I will email back my name and address.

www . fireballantiques @ comcast . net

all one word, no spaces.

Good Collecting, signalman
Guns have only two enemies, rust and politicians.


I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !

xavier
User
Posts: 4
Joined: Mon 07 Oct 2019, 17:20
Contact:

Re: buying LP-HEER parts

Post by xavier » Tue 08 Oct 2019, 20:58

I too need a
* barrel with extractor
* all associated hardware to mount barrel (pin, shim and spring)
* set of grips with screw
and MAYBE a firing pin
all for a ayf 42 flare pistol..
please comment on availability and price, plus shipping to texas

User avatar
signalman
User
Posts: 1106
Joined: Tue 27 Sep 2011, 14:51
Location: Sunny Florida
Contact:

Re: buying LP-HEER parts

Post by signalman » Tue 08 Oct 2019, 22:02

I still have the barrel with extractor. $ 60

Grips and Grip screw. $50

Shipping in USA for either or both $9

Good Collecting, Howard
Guns have only two enemies, rust and politicians.


I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !

Post Reply

Return to “Buy and sell flare guns”