hello collectors, i am looking for a lp34/heer aluminium barrel for my lp-heer flare gun, because someone put a steel lp-28 barrel on it. it has to come with an extractor and without dents. scratches and finish wear is okay because the gun is also quite used.
send offers on PM or on this e.mail:
Tito.tomos.69@gmail.com
best regards!
buying LP-HEER parts
-
- User
- Posts: 185
- Joined: Fri 01 Nov 2013, 20:52
Re: buying LP-HEER parts
I would not be in a rush to change that. Sometimes such things were done either in production or as "field expedient" repair. I would leave it for now.
As an example, I have a steel framed LP34 with an aluminum barrel and wood grips with horizontal cuts. I learned this is a somewhat rare variant produced late war, from leftover parts. There are other similar examples in existence.
As an example, I have a steel framed LP34 with an aluminum barrel and wood grips with horizontal cuts. I learned this is a somewhat rare variant produced late war, from leftover parts. There are other similar examples in existence.
Re: buying LP-HEER parts
Hello Blade,
You do not mention if the Steel barrel is serial numbered to the gun, mismatched, or has no serial number. I have an aluminum barrel with extractor that I would trade for a steel barrel with extractor, but you should only do it if the barrel you have is mismatched.
Good Collecting, Howard
You do not mention if the Steel barrel is serial numbered to the gun, mismatched, or has no serial number. I have an aluminum barrel with extractor that I would trade for a steel barrel with extractor, but you should only do it if the barrel you have is mismatched.
Good Collecting, Howard
Guns have only two enemies, rust and politicians.
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
Re: buying LP-HEER parts
this wasnt surplused by anyone, when the war was over this was droped and the germans and collaborators flead west, this one was found in a attic and it was rusted shut, i cleaned it up, its a walther made in 1942 (ac42) the number on the frame is "335b" and the number on the barrel is "24699" the marking on the barrel dont have any eagles just some normal proffs and a star infront that i assume is from a hardness test, its completly late-war it has all the stamped parts and a thin dark-brown grip
You do not have the required permissions to view the files attached to this post.
Re: buying LP-HEER parts
You do not have the required permissions to view the files attached to this post.
Re: buying LP-HEER parts
in addition to the aluminium barrel i am also looking for a early barrel spring set,early bakelite grips with screw, a trigger and a trigger pin
its okay if they have patina or alittle rust solong as they are functional
if you have just one of these im also intrested.
its okay if they have patina or alittle rust solong as they are functional
if you have just one of these im also intrested.
Re: buying LP-HEER parts
I do have the Barrel with extractor $ 50
Trigger and trigger pin, $ 35
Grips and gripscrew, $ 50
Shipping in USA $ 8.00 ; Total $143
I do not have the barrel spring set at this time.
email me to confirm purchase and I will email back my name and address.
www . fireballantiques @ comcast . net
all one word, no spaces.
Good Collecting, signalman
Trigger and trigger pin, $ 35
Grips and gripscrew, $ 50
Shipping in USA $ 8.00 ; Total $143
I do not have the barrel spring set at this time.
email me to confirm purchase and I will email back my name and address.
www . fireballantiques @ comcast . net
all one word, no spaces.
Good Collecting, signalman
Guns have only two enemies, rust and politicians.
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
Re: buying LP-HEER parts
I too need a
* barrel with extractor
* all associated hardware to mount barrel (pin, shim and spring)
* set of grips with screw
and MAYBE a firing pin
all for a ayf 42 flare pistol..
please comment on availability and price, plus shipping to texas
* barrel with extractor
* all associated hardware to mount barrel (pin, shim and spring)
* set of grips with screw
and MAYBE a firing pin
all for a ayf 42 flare pistol..
please comment on availability and price, plus shipping to texas
Re: buying LP-HEER parts
I still have the barrel with extractor. $ 60
Grips and Grip screw. $50
Shipping in USA for either or both $9
Good Collecting, Howard
Grips and Grip screw. $50
Shipping in USA for either or both $9
Good Collecting, Howard
Guns have only two enemies, rust and politicians.
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !